How to make the original shelf in the bathroom

Very often when repairing bathrooms and toilets it becomes necessary to close old protruding pipes. Segments of conclusions from the risers, lines of towel warmers do not add beauty to the room. One of the options for aesthetics and increased functionality is the manufacture of shelves. First, the shelves will be closed with ugly pieces of metal, and secondly, they will later serve as a storage place for all kinds of shampoos, air fresheners and detergents. For the manufacture of shelves, which is discussed in this article, the following materials are used:
  • Pieces of plywood, suitable in size, with a thickness of 10 (mm). Moisture-resistant drywall or gypsum-fiber sheet can also be used.
  • Wooden bars of 50 × 50 (mm). A metal profile of a similar size is also suitable.
  • Glass of 3 or 4 (mm) thickness.
  • Trimming of a tile that was left when laying the same room.
  • Liquid nails,
  • External decorative corners used for tiles.
  • Dowels with a diameter of 6 (mm).
  • Self-tapping screws 4.2 × 75 for fastening the bars to the wall.
  • Self-tapping screws in size 3.5 × 25 for mounting plywood sheets to bars.
  • Drying oil or wood primer
  • Grout for interlacing seams.
Tools that will be needed in work:
  • Glass cutter.
  • Drill.
  • Drill for tile.
  • Crown in the shape of a hemisphere.
  • Punch.
  • Shurupovort.
  • Roulette.
  • Corner
  • >
  • Pliers
  • Building level.
  • Electric jigsaw or hacksaw.
  • Tile cutter
  • Rubber spatula.

Manufacturing process

First two pieces of bars are fixed on both sides of the pipe using dowels and screws. The horizontal plane is controlled by the building level. It is necessary to make sure that the bars are fixed rigidly.
How to make the original shelf in the bathroom
Pieces of plywood electric jigsaw cut into the size of the shelf. Then they are screwed to the bars. It turns out the design in the form of boxes.Then the shelf should be covered with linseed oil to improve moisture resistance and dried.
How to make the original shelf in the bathroom
It happens that the pipe also appears in one of the corners. In this case, bars are mounted on both sides in the same way. Triangle-shaped pieces of plywood are fixed at the top and bottom, and a rectangle cut into size from the end.
How to make the original shelf in the bathroom
How to make the original shelf in the bathroom
How to make the original shelf in the bathroom
How to make the original shelf in the bathroom
Then the tile is laid. It is necessary to cut the pieces of tile so that they protrude over the edge of plywood by about two centimeters. The tile is easily cut with a glass cutter, but it is better to use a tile cutter if it is available.
How to make the original shelf in the bathroom
For the installation of the lower tile series, holes are drilled in each tile in the middle.Then the grooves are made recesses under the heads of the screws. Subsequently, the screws need to be covered with a grout. jpg "style =" max-width: 100%; " alt="How to make an original shelf in a bathroom">
Pieces of tiles are spread with liquid nails and fixed with self-tapping screws from below. The top row fits the same, but easier, without screws. In order to close the outer cut edge of the tile, a decorative plastic corner is used. It is also glued with liquid nails. The glue should dry up about twelve hours.How to make the original shelf in the bathroom Then the mosaic elements are made. Since the thickness of the shelves is 70 (mm), the glass is cut slightly smaller in size, i.e. approximately 60 (mm). Glass is suitable for anyone, you can make a mosaic even from trimming.
How to make the original shelf in the bathroom
The tile is cut into small pieces measuring approximately 10 × 10 (mm). Then liquid nails are applied to the glass and the pieces are glued to it in any order. It is only necessary to alternate between the dark and light colors of the tile,to impart some consistency to the picture.
How to make the original shelf in the bathroom
After complete drying of the liquid nails, sheets of the finished mosaic are glued to the ends of the shelves. In order for the gaps between tiles and mosaics to be the same, you can use plastic wedges.
How to make the original shelf in the bathroom
How to make the original shelf in the bathroom
The next day, you are ready to finish. The grout for inter tile joints is diluted with water to the consistency of sour cream and then the joints are filled with a rubber spatula. After about half an hour, the excess grout is removed with a soft sponge and water.

Related News


My husband is a sissy
How to weave a bauble from floss threads
Air Cleaner
Valentine Arrow of Cupid
Perfume with pheromones - true or myth